Save 30% or more on your next project by using Jetaire Ridge or Slop vent.
Available in Zincalume, colorbond or marine grade aluminium. Fast and reliable production times.
Ridge vents run the entire length of the roof peak, blending into the roofline for a more attractive appearance. The advantage of installing a ridge vent on your roof is that it maximizes airflow across the entire underside of roof sheathing of your building, instead of just a single fixed vent system.
Genesis Building Services highly recommends and supplies JETAIRE ridge vents for residential and commercial properties.
The JETAIRE ridge vent is suitable for all types of commercial buildings. The ridge vents are especially effective at removing heat, smoke and fumes from factories and industrial buildings. Throat sizes are available from 300mm to 5100mm maximum.
The aerodynamic design makes JETAIRE ridge ventilators suitable for all weather regions. Units are delivered ‘knock down’, packaged and pre-strapped for easy rigging and crane lifting.
Full shop drawings, installation and assembly instructions are provided with all JETAIRE ridge vent products. Structural and performance certification to: AS4740 (Main Standard)
- AS2428 Part 1 (Rain)
- AS2428 Part 2 (Wind)
- AS2428 Part 4 (Fire) *
- AS2428 Part 5 (Coefficient of Discharge)
- AS1668.2 and 1668.4.
- Zincalume or colorbond construction
- Vermin and amber proof mesh inside throat
- Free Delivery to most Australian locations
- Lifetime replacement warranty, due to product defect or failure
(excludes delivery & installation costs)
Motorised damper: 24V or 240watt.
Reinforced skylight sheeting in lieu of z/a sheet available for all models (excludes cyclonic regions)
Marine grade aluminium construction with choice of anodising or powder coat finish